Product Carousel Tabs
PLASTIC 400mL ECS – MADE IN GERMANY
بلاستيك سبراي (صنع في ألمانيا) يعتمد على راتنج أكريليك مناسب بشكل خاص للصناعة الإلكترونية. فهو يشكل طبقة لامعة ومرنة و واقية مقاومة للأحماض والملح والفطريات و الأبخرة الأكلة ، الإجهاد الحراري ،وإساءة الاستخدامات الميكانيكية ، القلويات والكحوليات والرطوبة والبيئية القاسية
يحتفظ بفعاليته داخل نطاق واسع تتراوح درجات الحرارة من -70 درجة مئوية إلى + 120 درجة مئوية حيث يلتصق الاسبراي بمواد مختلفة مثل المعدن ،البلاستيك ، والخشب ، والكرتون ، والزجاج ، إلخ
بلاستيك سبراي لا يقوم بالتنقيط ويسمح باللحام من خلال طبقته الخاصة. كذلك يحتوي بلاستيك سبراي على مؤشر الأشعة فوق البنفسجية لمراقبة الجودة
بلاستيك سبراي يحمي لوحات الدوائر المطبوعة ، والمكونات ، الكابلات السلكية ، وما إلى ذلك سبراي البلاستيك يحافظ من الماء والأوساخ والرطوبة وهو عبارة عن حماية مثالية من التآكل للأجزاء المعرضة للضرر من الأحوال الجوية المتقلبة. إنه يقوم بعزل المياه على مختلف المواد مثل البورد الالكترونية و الورق المقوى والخشب والجلد وما إلى ذلك.
UT61E+ 1000V True RMS Digital Multimeter

UT61E+ 1000V True RMS Digital Multimeter
Specifications | Range | UT61E+ |
Certifications (UT161 Series only) | CE/RoHS/cETLus | |
Safety ratings | CAT III 1000V/CAT IV 600V | |
AC voltage (V) | 1000V | ±(0.8%+10) |
DC voltage (V) | 1000V | ±(0.05%+5) |
AC current (A) | 20A | ±(0.8%+10) |
DC current (A) | 20A | ±(0.5%+10) |
Resistance (Ω) | 220MΩ | ±(0.5%+10) |
Capacitance (F) | 220mF | ±(3%+5) |
Frequency (Hz) | 220MHz | ±(0.01%+5) |
Duty cycle (%) | 0.1%~99.9% | ±(2%+5) |
Display count | 22000 | |
Bandwidth (Hz) | 40~10kHz | |
LPF ACV | √ | |
ACV+DCV | √ | |
Transistor hFE | √ | |
Peak Hold | √ | |
Analog bar | 46 | |
General Characteristics | ||
Power | 1.5V battery (R03) x 4 | |
Product net weight | 350g | |
Product size | 190mm x 90mm x 50mm | |
Standard accessories | Battery, gold plated test leads, USB cable, temperature multi-purpose socket, English manual | |
Standard individual packing | Gift box, cloth bag |
UTG932E Function/Arbitrary Waveform Generator (30MHz)

UTG932E Function/Arbitrary Waveform Generator (30MHz)
Specifications | |
Model | UTG932E |
Channel | 2 |
Max frequency | 30MHz |
Sampling rate | 200MS/s |
Vertical resolution | 14 bits |
Waveforms | Sine, square, pulse, ramp, noise, DC, arbitrary |
Sweep modes | Logarithmic, linear |
Frequency Characteristics | |
Sine | 1μHz~30MHz |
Square | 1μHz~15MHz |
Ramp | 1μHz~400kHz |
Pulse | 1μHz~15MHz |
Arbitrary | 1μHz~10MHz |
Resolution | 1μHz |
Accuracy | Within 90 days ± 50ppm |
Within 1 year ± 100ppm | |
18℃~28℃ | |
Output Characteristics | |
Impedance | 50Ω/High Z |
Amplitude range | 1mVpp~10Vpp (50Ω); 2mVpp~20Vpp (high Z) |
DC offset range (AC+DC) | ±5V (50Ω); ±10V (high Z) |
Amplitude resolution | 1mV |
General Characteristics | |
Power | 100~240VAC, 50Hz/60Hz |
Display | 4.3”TFT LCD (480×272) |
Product color | White and grey |
Product net weight | 0.33kg |
Product size | 172mm x 90mm x 68mm |
Standard accessories | USB interface cable, power cord, BNC cable with alligator clips |
UT89X Digital Multimeter (NEW Featured Model)
Specifications | Range | UT89X |
DC voltage (V) | 600mV/6V/60V/600V/1000V | ±(0.5%+2) |
AC voltage (V) | 6V/60V/600V/1000V | ±(0.8%+5) |
DC current (A) | 60μA/60mA/600mA/20A | ±(0.8%+8) |
AC current (A) | 60mA/600mA/20A | ±(1%+12) |
Resistance (Ω) | 600Ω/6kΩ/60kΩ/600kΩ/6MΩ/60MΩ | ±(0.8%+3) |
Capacitance (F) | 6nF/60nF/600nF/6μF/60μF/600μF/6mF/60mF/100mF | ±(2.5%+20) |
Frequency (Hz) | 9.999Hz/9.999MHz | ±(0.1%+4) |
Duty cycle | 0.1%~99.9% | ±(2%+5) |
Temperature (℃) | -40℃~1000℃ | ±(2%+4) |
Temperature (℉) | -40℉~1832℉ | ±(2%+8) |
Features | ||
Display count | 6000 | |
Sampling rate | 3 times/s | |
True RMS | √ | |
AC voltage frequency response | 45~1000Hz | |
AC current frequency response | 45~1000Hz | |
Live wire test | √ | |
Audible/visual alarm | V/A/Cap/Diode/hFE/NCV/Live (UT89X)/LED (UT89XD) | |
Diode/Continuity test | √ | |
Transistor hFE | √ | |
Dual range NCV test | √ | |
Auto power off | √ | |
Low battery indication | √ | |
Data hold | √ | |
Function selection | SELECT | √ |
Flashlight | √ | |
Auto backlight | √ | |
General Characteristics | ||
Power | 1.5V battery (R03) x 4 | |
Display | 61mm x 36mm | |
Product color | Red and grey | |
Product net weight | 345g | |
Product size | 189mm x 89mm x 53mm | |
Standard accessories | Batteries, test lead, k-type temperature probe |
UT387B Wall Scanner
Specifications |
Range |
Ferrous Metals |
80mm |
Non-ferrous Metals |
80mm |
Copper Conductors (live) |
50mm |
Wood |
20mm |
Features |
|
Buzzer Indication |
√ |
LED Flashlight |
√ |
User Calibration |
√ |
Auto Power Off |
√ |
Low Battery Indication |
√ |
Silent Mode |
√ |
UT683KIT Wire Tracer

UT683KIT Wire Tracer
Description | |
Certificates | CE, RoHS |
Transmitter | |
Port flashing | √ |
Wire tracking | √ |
Line alignment | √ |
Open-short test | 10kΩ |
Polarity test | √ |
Operating time | >8 hours |
Receiver | |
Wire tracking | RJ11>3000m; RJ45>100m |
NCV function | √ |
Headset jack | 3.5mm |
Low battery indication | √ |
Operating time | >5 hours |
GENERAL CHARACTERISTICS | |
Power | 1050mAh rechargeable lithium battery |
Product net weight | Transmitter: around 95g; Receiver: around 127g |
Product size | Transmitter-130mm x 51mm x 28mm; Receiver-197mm x 48mm x 34mm |
Standard accessories | USB cable, RJ11 aligator clip test cable, RJ45 test cable, RJ11 test cable, English manual |
Standard individual packing | Gift box, carrying bag |
New Products
CNC & Motion Parts
Measuring Instruments
UT33D+ Palm Size Digital Multimeter
Specifications | Range | Accuracy |
UT33D+ | ||
DC voltage (V) | 200.0mV~600V | ±(0.5%+3) |
AC voltage (V) | 200.0mV~600V | |
200.0V~600V | ±(1.2%+3) | |
DC current (A) | 200.0μA~10.00A | ±(1.0%+3) |
AC current (A) | 200.0μA~10.00A | NA |
Resistance (Ω) | 200.0Ω~200.0MΩ | ±(1.0%+2) |
200.0Ω~20.00MΩ | ||
Capacitance (F) | 2.000nF~2.000mF | NA |
Features | ||
Max display | 1999 | |
Auto power off | √ | |
Auto backlight off | √ | |
Diode test | √ | |
Continuity buzzer | √ | |
Drop test | 2m | |
Test probe holder | √ | |
Safety rating | CAT Ⅱ 600V | |
Range selection | Manual | |
Battery test | ||
Temperature (°C/°F) | ||
NCV | √ |
UT89X Digital Multimeter (NEW Featured Model)
Specifications | Range | UT89X |
DC voltage (V) | 600mV/6V/60V/600V/1000V | ±(0.5%+2) |
AC voltage (V) | 6V/60V/600V/1000V | ±(0.8%+5) |
DC current (A) | 60μA/60mA/600mA/20A | ±(0.8%+8) |
AC current (A) | 60mA/600mA/20A | ±(1%+12) |
Resistance (Ω) | 600Ω/6kΩ/60kΩ/600kΩ/6MΩ/60MΩ | ±(0.8%+3) |
Capacitance (F) | 6nF/60nF/600nF/6μF/60μF/600μF/6mF/60mF/100mF | ±(2.5%+20) |
Frequency (Hz) | 9.999Hz/9.999MHz | ±(0.1%+4) |
Duty cycle | 0.1%~99.9% | ±(2%+5) |
Temperature (℃) | -40℃~1000℃ | ±(2%+4) |
Temperature (℉) | -40℉~1832℉ | ±(2%+8) |
Features | ||
Display count | 6000 | |
Sampling rate | 3 times/s | |
True RMS | √ | |
AC voltage frequency response | 45~1000Hz | |
AC current frequency response | 45~1000Hz | |
Live wire test | √ | |
Audible/visual alarm | V/A/Cap/Diode/hFE/NCV/Live (UT89X)/LED (UT89XD) | |
Diode/Continuity test | √ | |
Transistor hFE | √ | |
Dual range NCV test | √ | |
Auto power off | √ | |
Low battery indication | √ | |
Data hold | √ | |
Function selection | SELECT | √ |
Flashlight | √ | |
Auto backlight | √ | |
General Characteristics | ||
Power | 1.5V battery (R03) x 4 | |
Display | 61mm x 36mm | |
Product color | Red and grey | |
Product net weight | 345g | |
Product size | 189mm x 89mm x 53mm | |
Standard accessories | Batteries, test lead, k-type temperature probe |
UT39A+ Modern Digital Multimeter
Specifications | Range | Basic Accuracy |
Model | UT39A+ | |
DC voltage | 400.0mV | ±(0.5%+5) |
4.000V | ||
40.00V | ||
400.0V | ||
1000V | ±(0.7%+3) | |
AC voltage | 4.000V | ±(1.0%+2) |
40.00V | ±(0.8%+3) | |
400.0V | ||
750V | ||
AC current | 40.00mA | ±(1.0%+2) |
400.0mA | ±(1.0%+2) | |
10.00A | ±(1.5%+3) | |
DC current | 40.00uA | ±(0.8%+3) |
400.0uA | ||
4.000mA | ||
40.00mA | ||
400.0mA | ||
10.00A | ±(1.2%+5) | |
Resistance | 400.0Ω | ±(1.0%+2) |
4.000kΩ | ±(0.8%+2) | |
40.00kΩ | ||
400.0kΩ | ||
4.000MΩ | ±(1.0%+2) | |
200.0MΩ | ±(5%+10) | |
Capacitance | 4.000nF | ±(4.0%+10) |
40.00nF | ||
400.0nF | ±(4.0%+5) | |
4.000uF | ||
40.00uF | ||
400.0uF | ||
4.000mF | ±10% | |
10.00mF | ||
Features | ||
Display count | 4100 | |
Auto range | √ | |
hFE | √ | |
Diode test | √ | |
Continuity test | √ | |
Low battery indication | √ | |
Data hold | √ | |
Relative mode | √ | |
Auto power off | √ | |
Backlight | √ | |
Operation temperature | 0℃~40℃ | |
Safety rating | CAT II 1000V/CAT III 600V |
UT204+ (AC/DC) 600A Digital Clamp Meter – True RMS

UT204+ (AC/DC) 600A Digital Clamp Meter – True RMS
Specifications | Range | UT204+ |
AC current (A) | 400A | |
600A | ±(2.5%+5) | |
AC current frequency (Hz) | 50Hz~100Hz | |
DC current (A) | 400A | |
600A | ±(2.5%+5) | |
AC voltage (V) | 600V | ±(0.8%+5) |
AC voltage frequency(Hz) | 10Hz~10kHz | |
10Hz~60kHz | ±(0.5%+2) | |
DC voltage (A) | 600V | ±(0.5%+2) |
Resistance (Ω) | 40MΩ | |
60MΩ | ±(0.8%+2) | |
Capacitance (F) | 4mF | |
40mF | ||
60mF | ±(4%+5) | |
Temperature (℃) | -40℃~1000℃ | ±(1.5%+5) |
Frequency (Hz) | 10Hz~10MHz | ±(0.1%+4) |
Features | ||
Display count | 6000 | |
Auto range | √ | |
Jaw opening | 28mm | |
True RMS | √ | |
NCV | √ | |
Live wire test | √ | |
Continuity test | √ | |
Diode | √ | |
MAX/MIN | √ | |
Relative mode | √ | |
Zero mode | √ | |
Data hold | √ | |
Low battery indication | √ | |
Auto power off | √ | |
General Characterisitics | ||
Power | 1.5V battery (R03) x 2 | |
Display | 37mm x 25mm | |
Product color | Red and grey | |
Product net weight | 235g | |
Product size | 215mm x 63mm x 36mm | |
Standard accessories | Batteries, test leads, Themocouple | |
Standard individual packing | Gift box, Carring bag, English manual |
UT373 Mini Tachometer (Measuring RPM) Contact Less

UT373 Mini Tachometer (Measuring RPM) Contact Less
Specifications | Range | Resolution | Accuracy |
RPM measurement | 10.0~9999.9RPM | 0.1 | ±(0.04%+2) |
10000~99999RPM | 1 | ||
Counting measurement | 0~99999 counts | 1 | ±1 |
Features | |||
Auto range | √ | ||
Auto power off | √ | ||
Low battery indication | √ | ||
Laser-on indication | √ | ||
Data hold | √ | ||
MAX/MIN | √ | ||
Rotating speed/count function switching | √ | ||
Overload indication | √ | ||
LCD backlight | √ | ||
Refresh rate | 1s to 7s (>120rpm for 1s) | ||
Sensor type | Photodiode and laser tube | ||
Target distance | 50mm~200mm | ||
Measuring angle | ±30° from perpendicular | ||
Drop test | 1m | ||
General Characterisitics | |||
Power | 1.5V battery (R03) x 3 | ||
Display | 5-digit segment code; 99999 max display | ||
Product color | Red and grey | ||
Product net weight | 85g (excluding battery) | ||
Product size | 183.8mm x 56mm x 34mm | ||
Standard accessories | Batteries, reflective tape |
UT39C+ Modern Digital Multimeter
Specifications | Range | Basic Accuracy |
Model | UT39C+ | |
DC voltage | 400.0mV | ±(0.5%+5) |
4.000V | ||
40.00V | ||
400.0V | ||
1000V | ±(0.7%+3) | |
AC voltage | 4.000V | ±(1.0%+2) |
40.00V | ±(0.8%+3) | |
400.0V | ||
750V | ||
AC current | 4.00mA | ±(1.0%+2) |
400.0mA | ±(1.0%+2) | |
10.00A | ±(1.5%+3) | |
DC current | 400.0uA | ±(0.8%+3) |
400.0mA | ±(0.8%+3) | |
10.00A | ±(1.2%+5) | |
Resistance | 400.0Ω | ±(1.0%+2) |
4.000kΩ | ±(0.8%+2) | |
40.00kΩ | ||
400.0kΩ | ||
4.000MΩ | ±(1.0%+2) | |
40.00MΩ | ±(1.2%+3) | |
Capacitance | 4.000nF | ±(4.0%+10) |
40.00nF | ||
400.0nF | ±(4.0%+10) | |
4.000uF | ±(4.0%+5) | |
40.00uF | ||
400.0uF | ||
4.000mF | ±10% | |
10.00mF | ||
Frequency | 10Hz~1MHz | ±(0.1%+4) |
Temperature °C | -40~40℃ | ±4℃ |
>40~500℃ | ±(1.0%+4) | |
>500~1000℃ | ±(2.0%+4) | |
Temperature °F | -40~104℉ | ±5℉ |
>104~932℉ | ±(1.5%+5) | |
>932~1832℉ | ±(2.5%+5) | |
Features | ||
Display count | 4100 | |
Auto range | √ | |
hFE | √ | |
NCV | √ | |
Diode test | √ | |
Continuity test | √ | |
Low battery indication | √ | |
Data hold | √ | |
Relative mode | √ | |
Auto power off | √ | |
Backlight | √ | |
Operation temperature | 0℃~40℃ | |
Safety rating | CAT II 1000V/CAT III 600V |
UT12D "Non-Contact AC Voltage Detectors"

UT12D "Non-Contact AC Voltage Detectors"
Specifications | |
Model | UT12D |
AC voltage (Low) | 24V~1000V |
AC voltage (High) | 90V~1000V |
Frequency range | 50/60Hz |
Built-in flashlight | √ |
※Audible (buzzer) and visual (LED) indication | √ |
Buzzer | √ |
LED indication | √ |
Auto power off | √ |
Low voltage indication | √ |
Drop test | 1m |
General Characteristics | |
Power | 1.5V battery (R03) x 2 |
Product color | Red and grey |
Product net weight | 50g |
Product size | 150mm x 18 mm x 23mm |
Standard accessories | Batteries |
Standard individual packing | Blister, English manual |
A12T Temperature Humidity Meter (With Probe)

A12T Temperature Humidity Meter (With Probe)
Specification | ||
Model | UNI-T A12T | |
Temperature | Range | -10~50℃ (14~122°F) |
Resolution | 0.1℃ (0.1°F) | |
Accuracy | ±1℃ (±1.8°F) | |
External temperature probe | Range | -10~50℃ (14~122°F) |
Resolution | 0.1℃ (0.1°F) | |
Accuracy | ±1℃ (±1.8°F) | |
Humidity | Range | 10~99%RH |
Resolution | 1%RH | |
Accuracy | ±5%RH | |
Features | ||
LCD size | 4.5″ | |
Comfort classification | √ | |
Sampling frequency | 10s | |
Alarm clock | √ | |
Time | √ | |
Date | × | |
12/24 hour mode | √ | |
MAX/MIN | √ | |
Battery | 1*AAA | |
Certification | CE |
UT89XD Digital Multimeter (With LED Measurement)

UT89XD Digital Multimeter (With LED Measurement)
Specifications | Range | UT89XD |
DC voltage (V) | 600mV/6V/60V/600V/1000V | ±(0.5%+2) |
AC voltage (V) | 6V/60V/600V/1000V | ±(0.8%+5) |
DC current (A) | 60μA/6mA/60mA/600mA/20A | ±(0.8%+8) |
AC current (A) | 60mA/600mA/20A | ±(1%+12) |
Resistance (Ω) | 600Ω/6kΩ/60kΩ/ 600kΩ/6MΩ/60MΩ |
±(0.8%+3) |
Capacitance (F) | 6nF/60nF/600nF/6μF/60μF/600μF/6mF/60mF/100mF | ±(2.5%+20) |
Frequency (Hz) | 9.999Hz/9.999MHz | ±(0.1%+4) |
Duty cycle | 0.1%~99.9% | ±(2%+5) |
Features | ||
Display count | 6000 | |
Sampling rate | 3 times/s | |
True RMS | √ | |
AC voltage frequency response | 45~1000Hz | |
AC current frequency response | 45~1000Hz | |
LED test | √ | |
Audible/visual alarm | V/A/Cap/Diode/hFE/NCV/Live (UT89X)/LED (UT89XD) | |
Diode/Continuity test | √ | |
Transistor hFE | √ | |
Dual range NCV test | √ | |
Auto power off | √ | |
Low battery indication | √ | |
Data hold | √ | |
Function selection | SELECT | √ |
Flashlight | √ | |
Auto backlight | √ | |
General Characteristics | ||
Power | 1.5V battery (R03) x 4 | |
Display | 61mm x 36mm | |
Product color | Red and grey | |
Product net weight | 345g | |
Product size | 189mm x 89mm x 53mm | |
Standard accessories | Batteries, test lead, k-type temperature probe (UT89X) | |
Standard individual packing | Gift box, English manual |
UT363 Mini Anemometer (Wind Speed Measurement) & Temperature

UT363 Mini Anemometer (Wind Speed Measurement) & Temperature
Functions | Range | Resolution | Accuracy |
Wind Speed | 0~30m/s | 0.1m/s | ±5%rdg+0.5 |
Temperature | -10~50℃ | 0.1℃ | ±2℃ |
14~122℉ | 0.2℉ | ±4℉ | |
Wind Scale | Level 0~12 | 1 | ±1 |
Sampling Rate | 0.5s | ||
Overload Indication | >45m/s | OL | |
MAX/AVG | MAX/AVG | ||
Data Hold | HOLD | ||
LCD Backlight | Yes | ||
Auto Power Off | 5min | ||
Low Battery Indication | 3.0~3.5V | ||
Battery | 4.5V | ||
Current Consumption | Working | mA | ≤25mA |
Power off | uA | ≤10uA | |
Work Environment | Temperature | 0~40℃ | |
Humidity | ≤80%RH | ||
Storage Environment | Temperature | -20~60℃ | |
Humidity | ≤75%RH | ||
Key Functions | |||
ON/OFF | Short press to turn on/off the meter | ||
MAX/AVG | Short press to switch between MAX/MIN/QUIT | ||
UNIT | Short press switch between m/s, ft/m, mph, Km/h, Knots, ℃, ℉. | ||
HOLD/BL | Short press to turn on/off backlight |