• The CEX+ provides a richer trigger mode, 34 kinds of automatic parameter measurement and common mathematical operation functions, and optimizes the panel operation, which greatly improves the work efficiency and can easily cope with the measurement needs of complex signals.

100 MHz BANDWIDTH
2 ANALOG CHANNELS
1 GSa/s REAL-TIME SAMPLE RATE
64 kpts MAX. MEMORY DEPTH
5000 wfms/s WAVEFORM CAPTURE RATE

  • Wider display range and multiple frequency square wave options
    The UTD2000CEX+ series display range is 8divX16div, and has a new AUTOSET strategy, which can easily cope with complex test scenarios.
  • Various parameter measurement and waveform recording functions
    The UTD2000CEX+ series supports 34 kinds of automatic measurement functions and waveform recording functions.which can record up to 1000 frames, and can achieve better waveform analysis effects through playback and storage functions.
SKU: AVO.UTD2102CEX+.UNIT Categories: , ,

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UTD2102CEX+ Digital Color Oscilloscope – B.W. 100MHz (1GSa/s Real-Time Sample Rate)”

There are no reviews yet.

You may also like…

  • , ,

    UTD2202CE Digital Color Oscilloscope – B.W. 200MHz

    0 out of 5
    (0)

    for more details click here

    Model UTD2202CE
    Channels 2
    Bandwidth 200MHz
    Sample Rate 1GS/s
    Rise Time ≤1.8ns
    Memory Depth 16Mpts
    Waveform Acquisition Rate ≥150,000wfms/s
    Vertical Sensitivity (V/div) 2mV/div~5V/div
    Time-based Range (s/div) 2ns/div~50s/div
    Storage Setup, Wave, Bitmap, CSV
    Trigger
    Trigger Frequency 6 bits
    Trigger Modes Edge, Pulse, Video, Slope, Alternate
    Trigger Level Range Internal Center of the Screen±div
    EXT ±1.2V
    EXT/5 ±6V
    Suppression Range 100ns~1.5s
    Edge Trigger
    Edge Mode Rising, Falling, Rising and Falling
    Pluse Trigger
    Trigger Mode Positive pulse width (greater than, less than or equal to); Negative pulse width (greater than, less than or equal to)
    Pluse Width Range 20ns~10s
    Video Trigger
    Signal Mode and Line/Field Supports standard NTSC, PAL and SECAM signal mode, lines range is 1-525 (NTSC) and 1-625 (PAL/SECAM)
    Slope Trigger
    Trigger Mode Positive slope (greater than, less than or equal to); Negative slope (greater than, less than or equal to)
    Time Setting 20ns~10s
    Measurements
    Cursor Manual Mode Voltage difference between the cursor (ΔV), Time difference between cursor (ΔT), reciprocal of ΔT(Hz) (1/ΔT)
    Tracking Mode Voltage value and time value of wave point
    Auto Measurements Allowed to display cursor in auto measurement
    Auto Measurements Maximum, Minimum, Peak to Peak Value, Top Value, Amplitude, Period Average, Average, Period Mean Square Root, Mean Square Root, Area, Period Area, Overshoot, Undershoot, Rising Edge, Falling Edge, Frequency, Period, Rising Time, Falling Time, Pulse Width, Positive Pulse Width, Negative Pulse Width, Burst Pulse Width, Positive Duty Ratio, Negative Duty Ratio, Phase, FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF
    Mathematics Operations Add, Subtract, Multiply, Divide and Reverse Phase
    Storage Waveform 10 groups of waveforms, 10 kinds of settings
    FFT Window Hanning, Hamming, Blackman, Rectangular
    Sample Point 1024 points
    Lissajous Figures Bandwidth 60MHz/100MHz
    Phase Difference ±3 degrees
    Others
    Interface Standard Accessories: USB Host, USB Device, Pass/Fail; Optional: LAN, LA
    General Characteristics
    Power 100~240V ACrms, 50Hz/60Hz
    LCD Size 7 inches TFT LCD, WVGA (800×480)
    Product Color Ivory and grey
    Product Net Weight 2.9kg
    Product Size (W×H×D) 332mm×147mm×170mm
    Standard Accessories Probes×2 (1:1,10:1 switchable), Power Cord, USB Cable, PC Software CD
    SKU: AVO.UTD2202CE.UNIT