, ,

TMC2209 V2.0 – Stepper Motor Driver – MKS


EGP165.00

DESCRIPTION

TMC2209 have all function of TMC2208, can completely replace tmc2208. At the same time, TMC2209 has better heat dissipation, supports a bigger current, supports sensorless-homing function.

Features:

  • Ultra-quiet
  • Large heat sink, good heat dissipation
  • Support sensorless-homing function.
  • Support uart mode by set jumper caps instead of welding on mks gen_l V2.0,skr1.3/1.4,mks sgen_l.

NOTES

  • Pay attention to the connection direction, do not reverse it.
  • The motor direction is opposite to that of A4988 and DRV8825, please adjust the firmware or adjust the motor wiring if you want to change A4988.
  • Dir/step mode used in the printer control board, please pay attention to set the jumper cap MS1 MS2.

SPECIFICATIONS

  • Default current: 0.88A
  • Recommend current: 1.72A (at most)
  • Max current: 2A
  • Logic voltage: 3.3V/5V
  • Input voltage: 5.5 – 28V
  • Microstep: Up to 1/256
  • Mode:
    • DIR/STEP
    • UART
SKU: KIT.TMC2209.DRIVER Categories: , ,

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “TMC2209 V2.0 – Stepper Motor Driver – MKS”

There are no reviews yet.

You may also like…