NEMA34 Waterproof IP65 High Speed 12 N.m Closed Loop Stepper + Drivers + 5m Cables (Leadshine)

1. High Speed closed loop stepper motor waterproof CS-M234120WP – 12 Nm  NEMA 34 with 1000-Line Encoder 14mm Shaft
2. Closed Loop Driver Model CS-D1008
3. Encoder 5 meters cable
4. Motor 5 meters cable

• 2 phase, NEMA 34 frame size
• 158 mm long
• 6 A phase current
• 12 N.m holding torque
• 14 mm shaft size
• Integrated 1,000 line (4,000 count/revolution) quadrature rotary encoder
• High precision, low motor heating, and low vibration
• Build with high quality materials including bearings and shaft made by Japanese manufacturers.
• This closed loop stepper motor can be adopted in many industrial applications with excellence performance such as high precision, low motor heating, and low vibration.

• Model CS-M234120WP
• Series CS-M
• Phase 2 phase
• Frame Size (NEMA) 34
• Length (mm) 164
• Holding Torque (N.m) 12
• Phase Current (A) 6.0
• Shaft Diameter (mm) 14
• Center Diameter (mm) 60
• IP Rate IP65
• Characteristics Waterproof
• Resistance (Ohm) 0.75
• Inductance (mH) 5.5
• Inertia (kg/cm2) 3
• Weight（kg） 4.8

2- Driver Features

• Step & direction or CW/CCW control modes
• Supply voltage of 20-80 VAC or 30-100 VDC, maximum output current of 8.0A
• Powering 2-phase stepper motor of NEMA 23, 24, 34, or 42 with 1000-line encoder
• Closed-loop, eliminates loss of steps
• No Tuning & No hunting
• No overshooting
• No torque margin
• Reduced motor heating and more efficient
• Smooth motion and super-low motor noise
• CE certified and RoHS compliant
• CS-D1008 Driver can close the position loop between the motor and drive and therefore eliminate the loss of step problem in an open loop system.
• CS-D1008 adopted closed loop stepper system can eliminate loss of step, make real-time position error correction, and use 100% available torque of the driven stepper motor. It can also power the driven stepper motor with reduced heating, lower noise, low vibration, …

Download

DATASHEET