This USB powered checker for good voltage and current as well as discharge (charging) will display in real time, and calculate the capacity (mAh).
Mode switch button located on the right, long press, the mAh number as the value of the data number 0 record inside. And, data number 0 is displayed: number 1 is set to new, mAh values to new measurement start from 0. In this way, up to 10 data in it inside the record.
- Can test the battery voltage, current, discharge capacity (total of 10 sets of data)
- View: Double-click the button (0.5 S or less), enter to view the data view mode
- High voltage or low Tip: LCD arrow LED backlight will flash alert notification
- Model: KCX-017
- Input Voltage: 3.5 V – 7 V
- Input current: < 3A
- Operating Current: < 20 mA
- Screen Size: 22 mm x 8.5 cm
- LCD Rate: 500mS/times
- Accuracy: voltage < + /-1% current < + /-2%
- Size: 60 mm x 30 mm x 10 mm
How to check the recorded data is as follows:
- Double-click mode switching button the screen flashes and record data browsing mode.
- Click the button in the State for each by you can make.
- View and record data in numerical order.
- Double-click again to exit from the browsing mode.
- Perch also flashes across the screen and exits read mode.