-17%
,

3D Printer PCB Mk2b 12/24 Volt Heatbed


Compare

EGP125.00 EGP150.00

PCB Heated Heat bed Heatbed MK2B Upgraded MK2A for Mendel RepRap CNC 3D printer Hot Bed HotBed Support 12V 24V

This heatbed is designed to be compatible with any 3D printer that can accept the RAMPS MK2B version of heatbed. This heatbed has a dual power capability allowing it to be used with 12V or 24V power supply sources. It features a central mounting hole on the front side to allow for three point mounting. This is much easier for bed levelling in comparison to 4 point mounting. First level the side with two holes and fix in place, then level the side with one hole. A glass plate is highly recommended to provide a truly flat surface and rigidity.Additionally, the solder pads have been greatly increased in size,making it much easier and allowing for the use of 1206 surface mount components.But this does not remove the need to use proper strain relief.

Please note: ABS filament is not recommended.

Features: 

  • Come with resistor and LEDs soldered,basic soldering skills needed to solder the power wire
  • Dimensions (Outer): 214mm x 214mm x 1.6mm
  • Dimensions (Heat Bed): 200mm x 200mm
  • Laminate FR4 1.6±0.15mm
  • 2 Layer, 35μm Copper
  • Power Input: 12V/24V DC
  • Copper Plated Holes
SKU: KIT.3D.1006 Categories: ,

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “3D Printer PCB Mk2b 12/24 Volt Heatbed”

There are no reviews yet.

You may also like…