-15%
, ,

UT682 Network Wire Tracker


Compare

EGP550.00 EGP650.00

UT682 – Wire Tracker consists of a transmitter and a receiver. It has functions like telephone wire tracking, network wire tracking, cable wire tracking, network wire check, etc. and it produces fast and accurate measurements. UT682 is an ideal tool for personnel to install and maintain network systems with communication lines and integrated wiring circuits.

Functions: 

  • Telephone wire tracking
  • Network wire tracking
  • Network line check
  • Power cable line check

Features:

  • Power supply: 9V Battery
  • Signal transmission form: Multi frequency pulse
  • Short circuit, open circuit test: √
  • Telephone line polarity instructions: √
  • Audio signal test range: ≥ 1000 m
  • Video line distance: ≥ 100 m
  • Low battery indication (Transmitter): √ 

Telephone Line Tracking Function:

  1. Connect the telephone line head into the transmitter's RJ11 interface;
  2. Press the transmitter functional select switch to the "TEST" positin. "Status" line tracking indicator will flask, which indicates that the transmitter works properly;
  3. Hold down the receiver "Press to test" button and look for the receiver cable with probe targets.
  4. During the testing, light press "Switch" button to switch between single and double audio test pattern.

Line Tracking Network Function:

  1. The network line with a crystal head into the transmitter RJ45 interface;
  2. Press the transmitter functional select switch to the "TEST" position, the "Status" Line tracking indicator will flash, which indicates that the transmitter works properly;
  3. Hold down the receiver "Press to test" button and look for the receiver cable with probe targets.
  4. During the testing, light press "Switch" button to switch between single and double audio test pattern.

Power Cable Line Tracking Function (Power cable must not be powered)

  1. Connecting the transmitter with metal cable using alligator clip adapter wiring;
  2. Adjust the transmitter functional select switch to the "TEST" position, the "Status" line tracking indicator will flash, which indicates that the transmitter works properly;
  3. Hold down the receiver "Press to test" button and look for the receiver cable with probe targets
  4. During the testing, light press "Switch" button to switch between single and double audio test pattern.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UT682 Network Wire Tracker”

There are no reviews yet.