This Board is 100% original & Designed & Assembled in ITALY

Connect your sensors and actuators over long distances harnessing the power of the LoRa® wireless protocol or throughout LoRaWAN™ networks.

Tech specs
The Arduino MKR WAN 1310 is based on the SAMD21 microcontroller.

  • Microcontroller SAMD21 Cortex®-M0+ 32bit low power ARM MCU (datasheet)
  • Radio module CMWX1ZZABZ (datasheet)
  • Board Power Supply (USB/VIN) 5V
  • Secure Element ATECC508 (datasheet)
  • Supported Batteries rechargeable Li-Ion, or Li-Po, 1024 mAh minimum capacity
  • Circuit Operating Voltage 3.3V
  • Digital I/O Pins 8
  • PWM Pins 13 (0 .. 8, 10, 12, 18 / A3, 19 / A4)
  • UART 1
  • SPI 1
  • I2C 1
  • Analog Input Pins 7 (ADC 8/10/12 bit)
  • Analog Output Pins 1 (DAC 10 bit)
  • External Interrupts 8 (0, 1, 4, 5, 6, 7, 8, 16 / A1, 17 / A2)
  • DC Current per I/O Pin 7 mA
  • CPU Flash Memory 256 KB (internal)
  • QSPI Flash Memory 2MByte (external)
  • SRAM 32 KB
  • EEPROM no
  • Clock Speed 32.768 kHz (RTC), 48 MHz
  • USB Full-Speed USB Device and embedded Host
  • Antenna gain 2dB (bundled pentaband antenna)
  • Carrier frequency 433/868/915 MHz
  • Working region EU/US (confirmed) other countries check your region’s spectrum availability
  • Length 67.64 mm
  • Width 25 mm
  • Weight 32 gr.


Arduino MKR WAN 1310 allows you to build your next smart project. Ever wanted an automated house? Or a smart garden? Well, now it’s easy with the Arduino IoT Cloud compatible boards. It means: you can connect devices, visualize data, control and share your projects from anywhere in the world. Whether you’re a beginner or a pro, we have a wide range of plans to make sure you get the features you need.

The Arduino MKR WAN 1310 board provides a practical and cost effective solution to add LoRa® connectivity to projects requiring low power. This open source board can be connected to the Arduino IoT Cloud.

Better and More Efficient

The MKR WAN 1310, brings in a series of improvements when compared to its predecessor, the MKR WAN 1300. While still based on the Microchip® SAMD21 low power processor, the Murata CMWX1ZZABZ LoRa® module, and the MKR family’s characteristic crypto chip (the ECC508), the MKR WAN 1310 includes a new battery charger, a 2MByte SPI Flash, and improved control of the board’s power consumption.

Improved Battery Power

The latest modifications have considerably improved the battery life on the MKR WAN 1310. When properly configured, the power consumption is now as low as 104uA! It is also possible to use the USB port to supply power (5V) to the board; run the board with or without batteries – the choice is yours.

On-board Storage

Data logging and other OTA (Over The Air) functions are now possible since the inclusion of the on board 2MByte Flash. This new exciting feature will let you transfer configuration files from the infrastructure onto the board, create your own scripting commands, or simply store data locally to send it whenever the connectivity is best. Whilst the MKR WAN 1310’s crypto chip adds further security by storing credentials & certificates in the embedded secure element.

These features make it the perfect IoT node and building block for low-power wide-area IoT devices.


SKU: ARDUINO.ORG.MKR.WAN.1310 Categories: , ,

Based on 0 reviews

0.0 overall

Be the first to review “Arduino MKR WAN 1310”

There are no reviews yet.