Oscilloscopes & Function Generator
Showing 1–15 of 24 results
-
All Products, DIY Professional Projects, Oscilloscopes & Function Generator
DDS Signal Generator FG-100 DDS Function Generator
All Products, DIY Professional Projects, Oscilloscopes & Function GeneratorDDS Signal Generator FG-100 DDS Function Generator
Features:
- Frequency range: Sine Wave 1Hz-500kHz (flat frequency where the output amplitude to 200 kHz, with a further increase in the frequency of the output amplitude will decrease), other waveforms 1Hz-20kHz (but adjustable frequency caps are not restricted, if the distortion and shaking ask, can further increase the frequency of use).
- Resolution: 1Hz.
- Output waveforms: sine, square, triangle wave, sawtooth forward, reverse sawtooth.
- Sine Wave Distortion: 1kHz or less <1%, 1kHz and above <0.5%.
- Output amplitude: maximum ± 10V (P-P).
- Output Impedance: 50 ohms.
- DC offset: maximum ± 10V, there are off function.
- Power Supply: DC3.5-10V. Select DC5V adapter is recommended when using 3.7V lithium battery batteries.
- Size: 125x80x32mm
- Package including : 1 x FG-100 DDS Signal Generator
You need to by probe separately.
SKU: AVO.FG100 -
All Products, Earth Ground | Insulation Resistance Testers, Environmental Meters & Testers, Oscilloscopes & Function Generator, UNI-T Brand Products
UTL8211 DC Electronic Load
All Products, Earth Ground | Insulation Resistance Testers, Environmental Meters & Testers, Oscilloscopes & Function Generator, UNI-T Brand ProductsUTL8211 DC Electronic Load
Specifications Model UTL8211 Number of channel 1 Input ratings 0~40℃ Voltage 0~150V Current 0~4A, 0~40A Power 400W CV mode Range 0~18V, 0~150V Resolution 1 mV, 10 mV Accuracy ±(0.05%+0.1% FS) CC mode Range 0~4A, 0~40A Resolution 1mA, 10mA Accuracy ± ( 0.05% + 0.05%FS ) CR mode Range 0.05Ω~7.5KΩ Resolution 16bits Accuracy 0.1% + 0.5%FS CP mode Range 400W Resolution 10mW Accuracy 0.1% + 0.5%FS Dynamic Current Dynamic mode T1&T2 100μS~3600S Accuracy 5 μS±100 ppm Slope 0.001~0.15 A/μS Readback voltage Range 0~18V, 0~150V Resolution 1mV, 10mV Accuracy ± ( 0.05% + 0.1%FS ) Readback current Range 0~4A, 0~40A Resolution 1mA, 10mA Accuracy ± ( 0.05% + 0.1%FS ) Readback power Range 400W Resolution 10mW Accuracy ± ( 0.1% + 0.5%FS ) Basic Protection Over-power protection Set value×1.01, delay protection, max 404W Set value×1.1, instant protection, max 440W Over-current protection Set value×1.01, delay protection, max 40.4A Set value×1.1, instant protection, max 44A Over-voltage protection ≥152V delay protection, ≥165V instant protection Over-temperature protection ≥95℃ Resolution 1mV/1mA Basic mode CC/CV/CR/CP Test mode Dynamic mode, list mode, battery test Protections Protections of over-voltage/under-voltage/over-current/over-power/over-temperature/anti-reverse connection System setup Language: Chinese/English, key tone setting Data storage 60 sets of data memory Interface & protocol RS232 interface and SCPI protocol PC software √ Operating temperature 0℃~40℃ Storage temperature -10℃~60℃ Operating humidity 20%~80% (Non-condensable) Storage humidity 20%~80% (Non-condensable) Operating altitude ≤2000m General Characteristics Power 110V/220V, 50/60Hz Display 2.8 inches LCD Product net weight 3.6kg Product size (W×H×D) 300mm x 88mm x 174mm SKU: AVO.UTL8211.UNIT -
All Products, Oscilloscopes & Function Generator, UNI-T Brand Products
UPO2104E Ultra Phosphor Oscilloscope – 4 Channel B.W. 100MHz