Quick Find more
 

Advanced Search

View All Items
 Categories
 What's New? more
GS80 - Mini-Table Top Suction Vise
GS80 - Mini-Table Top Suction Vise
 85.00L.E. 
 Bestsellers
01.ARM STM32 Minimum System Development Board "STM32F103C8T6"
 Information
Conditions of Use
Shipping & Returns
Privacy Notice
ARM STM32 Minimum System Development Board "STM32F103C8T6"  115.00L.E. 
For more information, please visit this Website

Description

Product Introduction
 
This is a core chip based on STM32F103C8T6 ARM core board, features as follows:
  • The board based on the most basic MCU circuit, 8Mhz crystal circuit, USB power supply circuit.
  • The core board is divided into two rows leads to all the I / O port.
  • With SWD simulation debug download interface, simple and convenient, debugging speed.
  • The use of the Mirco USB interface, you can do USB communication and power supply, USB interface, compatible with the ordinary mobile phone charger interface.
  • RTC crystal Epson brand, easy to start, more stable.
  • Keil can be used to compile, IAR compiler, can be downloaded through the JLink or USART1 procedures, the procedures are the owner and debugging procedures.
Chip Description:
  • STM32F103C8T6
    • Package Type: LQFP
    • Number of pins: 48
    • Kernel: Cortex-M3
    • Operating frequency: 72MHz
    • Storage resources: 64K Byte Flash, 20KByte SRAM
    • Interface Resources: 2x SPI, 3x USART, 2x I2C, 1x CAN, 37x I / O ports,
    • Analog-to-digital conversion: 2x ADC (12-bit / 16-channel)
    • Timers: 3 general timers and 1 advanced timer
    • Debug Download: Support JTAG / SWD debug interface to download, support for IAP.
  • RT9193: 3.3V regulator chip, the maximum output of 300mA.
Interface Description:
  • SWD interface: support for simulation, download and debug.
  • Mirco USB interface: power supply and USB communication, does not support the download.
  • USART1 interface: USART1 can be used to download the program, or use the USART1 for communication.
  • MCU pin interface: leads all I / O port pins, easy to connect with peripherals.
  • 5, 5V and 3.3V power input and output interface: commonly used in external power supply, or with other modules for common ground treatment.
Other Device Description:
  • Power LED (PWR): Power indicator status, can determine whether the power supply is stable.
  • The user LED (PC13): to facilitate the I / O output test or indicate the program running.
  • Start jumping choose programming mode: (1, the user flash memory 2,SRAM 3, system memory).
  • Reset button: reset chip for the user program.
  • 8M Crystal: The frequency can be set to make the system clocked at 72MHz.
  • 32.768KHz Crystal: Available for built-in RTC, or for calibration.
Write Review
1
1
Customers who bought this product also purchased
LM317T "3-Terminal 1.5A Adjustable Positive Regulator"
LM317T "3-Terminal 1.5A Adjustable Positive Regulator"
 3.50L.E. 
More info Buy Now
2.54mm (0.100") Pin Header Female 1x40 Straight
2.54mm (0.100") Pin Header Female 1x40 Straight
 4.00L.E. 
More info Buy Now
Micro SD Card Module For Arduino or MCU
Micro SD Card Module For Arduino or MCU
 45.00L.E. 
More info Buy Now
2.54mm (0.100") Pin Header Male 1x40 Straight
2.54mm (0.100") Pin Header Male 1x40 Straight
 2.00L.E. 
More info Buy Now
Capacitor   1000uF  16v
Capacitor 1000uF 16v
 0.75L.E. 
More info Buy Now
FR4-Single Layer 10x15 Cm2 (PCB7)
FR4-Single Layer 10x15 Cm2 (PCB7)
 15.00L.E. 
More info Buy Now
 Shopping Cart more
0 items
 Sign in
E-mail address:

Password:

Password forgotten
Create an Account
 My Wish List more
0 items
 Tell A Friend
 
Tell someone you know about this product.
 Specials more
UT682 Network Wire Tracker
UT682 Network Wire Tracker
 650.00L.E. 550.00L.E. 
 Reviews more
Write ReviewWrite a review on this product!
 Currencies
All content and Images Copyright © 2018 RAM Electronics
Copyright © 2000 - 2018 osCmax
Powered by osCmax v2.5.4