Quick Find more
 

Advanced Search

View All Items
 Categories
 What's New? more
UPO2104CS Ultra Phosphor Oscilloscope - 4 Channel B.W. 100MHz
UPO2104CS Ultra Phosphor Oscilloscope - 4 Channel B.W. 100MHz
 12,000.00L.E. 
 Bestsellers
01.9V Battery Clip
02.Battery 9V (Green GP-Extra Heavy Dute)
03.Battery Case For CR2025
04.9V Battery Holder
05.Endless Wire with Standard DC 2.1mm Male Plug 25Cm
06.2 x AA Battery Holder + On/Off Switch
07.3 x AA Battery Holder + On/Off Switch
08.Screw Terminal Block To Male DC Power Adapter - 2.1mm Plug
09.4 x AA Battery Holder + On/Off Switch
10.2 x AAA Battery Holder + On/Off Switch
 Information
Conditions of Use
Shipping & Returns
Privacy Notice
DC-DC Step Down Converter Variable 5A (4V~38Vdc to 1.25V~36Vdc)  75.00L.E. 

Description

Variable Output DC-DC Step Down Converter

  • LED power indicator.
  • Button to switch measurement of the input or output voltage, and LED indicates the current measurement of the input or output voltage. The display can be turned off by another button. Mentioned states are able to be memorized, is not lost even if the power is disconnected. (On-board marked "IN" LED is turned on, the display input voltage value, "OUT" LED bright display is the output voltage value).
  • With voltmeter calibration function.

Voltmeter calibration method:

  1. Output voltage calibration steps
    1. Step 1, adjust the right button so that "OUT" LED lighted, the voltmeter shows the value of output voltage; Press the right button for more than 2 seconds, release, voltmeter and "OUT" LED flashes in synchronization so that you enter the output voltage calibration mode.
    2. Step 2, press the right button (normal speed), the voltage value is adding up a unit; Press the left button, minus a unit; Due to a unit is less than 0.1V, the minimum voltage display to 0.1V, so you need to continuously press 1-5 times to see the voltmeter change 0.1V, how many times voltmeter change 0.1V by pressing the key, depending on the current display voltage, the higher the voltage, the fewer the number of press.
    3. Step 3, press the right button for more than 2 seconds, release, to exit the output voltage calibration mode. All parameters set to automatically power down to save.
  2. Input voltage calibration steps
    1. Step 1, adjust the right button so that "IN" LED lighted, the voltmeter shows the value of input voltage; press the right button for more than 2 seconds, release, voltmeter and "IN" LED flashes in synchronization so that you enter the input voltage calibration mode.
    2. Steps 2 and 3, consistent with the output voltage calibration method.

Performance Parameters:

  • Input voltage range:4~38VDC(Note:input voltage not exceeding 38V)
  • Output voltage range:1.25-36VDC adjustable
  • Output current: 0-5A
  • Output power: 75W
  • Voltmeter range: 4 to 40V, error ±0.1V
  • Operating frequency: 180KHz
  • High efficiency up to 96%
  • Built in thermal shutdown function
  • Built in current limit function
  • Built in output short protection function
  • Input reverse polarity protection: None (if required, high current diode in series with the input).
  • L x W x H =6.6*3.9*1.8 cm

Application:

The DC/DC buck module applications the input voltage is higher than the output voltage of the buck field, such as battery, power transformer, DIY adjustable regulated power supply, LCD Monitor and LCD TV,portable instrument power supply,telecom/networking equipment,24V vehicle notebook power supply,industrial equipment buck.12V buck to 3.3V, 12V buck to 5V, 24V buck to 5V,24V buck to 12V, 36V buck to 24V etc. 

Write Review
1
1
Customers who bought this product also purchased
40A PWM Motor Speed Control Switch Manual (10Vdc to 50Vdc)
40A PWM Motor Speed Control Switch Manual (10Vdc to 50Vdc)
 285.00L.E. 
More info Buy Now
goot JAPAN Soldering Irons (30W/40W) Replacement Tip Normal Size
goot JAPAN Soldering Irons (30W/40W) Replacement Tip Normal Size
 60.00L.E. 
More info Buy Now
Auto Lead Acid Battery Charger With Digital Display 6V/12Vdc-10A
Auto Lead Acid Battery Charger With Digital Display 6V/12Vdc-10A
 275.00L.E. 
More info Buy Now
Ultra Small Digital Dual Display Panel Meter DC (Volt & Ampere)
Ultra Small Digital Dual Display Panel Meter DC (Volt & Ampere)
 120.00L.E. 
More info Buy Now
Crocodile Pair Hand Medium Size
Crocodile Pair Hand Medium Size
 6.00L.E. 
More info Buy Now
goot KX-40R  New Design Grip General Soldering Iron 40W (JAPAN)
goot KX-40R New Design Grip General Soldering Iron 40W (JAPAN)
 190.00L.E. 
More info Buy Now
First Product Previous Product 41 of 44 in Battery Connectors & Accessories Next Product Last Product
 Shopping Cart more
0 items
 Sign in
E-mail address:

Password:

Password forgotten
Create an Account
 My Wish List more
0 items
 Tell A Friend
 
Tell someone you know about this product.
 Specials more
UTD2052CL Digital Color Oscilloscope - B.W. 50MHz
UTD2052CL Digital Color Oscilloscope - B.W. 50MHz
 4,950.00L.E. 3,950.00L.E. 
 Reviews more
Write ReviewWrite a review on this product!
 Currencies
All content and Images Copyright © 2018 RAM Electronics
Copyright © 2000 - 2018 osCmax
Powered by osCmax v2.5.4